Generally, the door and mother door are installed at the gate. The gate is the first place we need to touch before entering the house. The gates of self-built houses in rural areas and villas and other yard gates are more common. In fact, it is a special double-leaf door with dimensions. There are still certain requirements, the following is an introduction to the size and specifications of the son-mother door.
Introduction to the size and specifications of the son-mother door:
Under normal circumstances, when the width of the door opening is greater than the width of an ordinary single door of 800 to 1000 mm, on the other hand, it is less than about 2000 to 4000 mm of the total width of a double door, you can consider installing a secondary door. In this way, when opening and closing the door leaf, you don't need to use too much force, and when carrying large furniture, the traffic capacity will be better. Through investigation, we got some information related to the size of the Meridian Gate.
Usually, the size of the door is between 1500mm and 2000mm. The size of an ordinary single door is between 700mm and 1000mm. If the size of the door is between 1000mm and 1500mm, the door will be made. In order to reflect the overall beauty of the door, the door is designed as a child of all sizes.
The size and width ratio of the child-mother door is generally 1:2. For example, an entrance door is 1200mm wide. The best child-mother door size ratio is: the width of the mother door is 800mm, and the width of the child door is 400mm. The standard size of the son-mother door is 2100MM*1200MM*40MM; and the single door size of the security door is 950MM*2050MM*110MM. From the comparison of the two, we can find that the Meridian door as the security door is obviously thicker than the general Meridian door. A lot, but slightly reduced in height. The width of the widest child-mother door has reached 1320mm while keeping the height and thickness unchanged. It can be seen that the utility of mother-child is very high.
In this way, between the opening and closing of the door leaf, there is no need to push the door leaf too much, and it can pass well when large objects such as furniture need to be carried.
Standard denominator gate size: 2100MM (height) × 1200MM (width) * 40MM (thickness)
Security door single door size: 950MM (total width) *2050MM (total height) *110MM (frame thickness)
Security door female door size: 1200MM (total width) *2050MM (total height) *110MM (frame thickness)
The widest child-mother door size: 2180MM (height) * 1320MM (width) * 110MM (thickness)
The size design standard of the son-mother door:
1. Ordinary residence:
The size of the child-mother door used in an ordinary house is 1200mm*2000mm. The width of the unit door cannot be less than 2000mm, and the height cannot be less than 2200mm. The size of double-opening doors in rural yards is usually 1.5m or 1.8m. Their main consideration is that finished doors can be bought in the market according to this size, and doors of non-standard sizes are particularly cumbersome to make. But if you consider parking in the yard, you have to calculate it according to the width of your own car, but at least 2.1m!
2. Commercial housing:
The width of a single door is 1.2m to 1.5m, and the width of a double door is 1.8m or about 2m. Everyone should know the height. The country bungalow has a height of 2800mm and a width of 2600mm. For commercial housing entrance doors, you can consider using a child-mother door with a height of 2050mm and a width of 1260mm.
3. Villa:
Generally, there are two gates, which are divided into a courtyard gate and an entrance gate. Obviously, the width of the gate of a villa yard is generally determined according to the area of the villa and the building structure. For some large yards, the width of the gate of the villa can generally be determined. To 3 meters-4 meters. The height is also not limited. There are currently two most commonly used sizes for villa doors,
1.2m*2.5m, 1.5m*3m.
