Steel Fire Door Installation Guide

Sep 24, 2025 Leave a message

1. Pre-Installation Preparation & Compliance

Certifications & StandardsSteel fire doors must pass UL 10B or UL 10C fire tests and comply with NFPA 80. Popular search terms: "NFPA 80 fire door installation requirements", "UL certified steel fire door installation".

Frame Material: 1.2-1.5mm cold-rolled steel, filled with cement mortar or rock wool.

Door Panel: ≥0.8mm thickness, filled with non-combustible materials (e.g., expanded perlite), with steel skeleton spacing ≤300mm.

2. Core Installation Steps

Frame Alignment & Fixing

Secure the frame temporarily with wooden wedges, ensuring verticality deviation ≤1.5mm/m and horizontality deviation ≤2mm/m.

Use M10×80mm expansion bolts for concrete walls (spacing ≤600mm) or welding for steel structures (weld height ≥5mm).

Fill gaps between frame and wall with fire-rated rock wool (depth ≥50mm) and seal with fire-resistant caulk. Search term: "fire door frame installation steps".

Door Leaf Adjustment & Gap Control

Clearances: Top ≤3mm, sides ≤3mm, bottom ≤8mm (Class A doors).

Double doors: Middle gap ≤3mm with fire-resistant seals (compression rate ≥30%). Search term: "fire door gap adjustment".

Hardware Installation

Hinges: ≥3 per Class A door, each rated ≥800N, screws ≥15mm deep.

Closers: Test closing speed (4-6 seconds for 60° opening), with buffer speed ≤1.5m/s. Search term: "fire door closer installation".

3. Inspection & Common Issues

Testing & Acceptance

Operation Test: Manually open/close 3 times, ensure smooth movement and opening force ≤80N.

Smoke Test: Leakage ≤5m³/(m²·h) at 50Pa positive pressure. Search term: "fire door installation inspection checklist".

Common Problems & Solutions

Excessive Gaps: Re-adjust seals or refill rock wool.

Missing Hardware: Install closers/holders for double doors and closers for self-closing doors.

Unfilled Frame: Demolish and refill with cement mortar to prevent structural failure. Search term: "fire door installation common problems".

4. Regulations & Maintenance

Annual Maintenance: Inspect closers, seals, etc., per NFPA 80.

Labeling: Display UL certification labels with fire rating and installation date. Search term: "NFPA 80 vs UL fire door standards".

please get into the contact with servicer if need to learn more on the product price and size for

customized service .and Visit Alibaba