The so-called decoration is no small matter, any problem in any link will affect the overall beauty of the home. In fact, the installation of indoor wooden doors is also very particular, and the preliminary measurement work should not be sloppy. This is not just a simple measurement of the length, but also requires our carefulness and patience, and there are many more details worthy of attention. Come and share today about what to pay attention to when measuring indoor doors and the important things to pay attention to when installing.
Many people think that the measurement of interior doors is very cumbersome. Without the help of professionals, they would not be able to complete the measurement work. In fact, this is biased. As long as you learn to measure a few key points of the interior door, everyone can complete the measurement of the interior door well.
For the measurement of the width of the interior door opening. When measuring, pay more attention to horizontally measuring the distance between the left and right of the doorway, select five different points for measurement, and then take the smallest value. Generally, the error of these five data should be kept within plus or minus 15 mm, otherwise the door hole must be adjusted appropriately.
For the measurement of the height of the interior door opening. Generally, only three points need to be selected, and the minimum value is selected after the measurement. The error between the three data should be kept within 10 mm. Once it exceeds this range, it needs to be adjusted in time.
Measurement of the wall thickness of the interior door opening. Also need to maintain the level, choose five points to measure, the difference is to choose the maximum value as a reference. If the wall is painted, add the thickness of the paint. The error between the five data stays within 5 millimeters.
In addition, I remind everyone to note that the indoor door is measured and placed after the paving work. If the floor paving work is not completed, then a certain thickness needs to be reserved.
After finishing the measurement work of the interior door, we should pay attention to its installation link. Generally speaking, the installation of interior doors requires three steps:
After measuring the various indicators of the interior door, the top of the assembled stand board is sawed out a groove, the part of this groove should be in line with the part of the top cover protruding door, and then it is polished to remove the burrs .
Inlay the above two concave and convex parts together and fix them with wood screws. One thing to note is that its width needs to be 7 mm longer than the width and length of the interior door, and 13 mm higher than the door leaf.
