Do You Know Much About Wooden Fire Doors?

Mar 17, 2021 Leave a message

As one of the necessary equipment for building fire protection, fire doors are more or less understood by everyone. Fire doors can be divided into several materials, which can be divided into steel fire doors, wooden fire doors, steel wood fire doors and other materials fire doors, etc. We can basically rest assured of the performance of steel and steel wood fire doors, but wood fire protection Can the door really ensure good fire prevention? I believe many people are somewhat worried. Today's introduction is mainly aimed at the quality of wooden fire doors and installation standards. If you feel it is necessary, come and have a look.


Introduction to wooden fire doors


Perhaps everyone has thought that a wooden fire door is a kind of fire door made of wood or wood products, which means that the door frame, door leaf frame or door panel is made of wooden materials. Fire doors are generally used for the separation facilities of building fire doors, so fire doors are needed no matter in building fire protection measures or stairwells. Wooden fire doors have strict requirements in production, such as the thickness of the door frame or the design requirements of the door, etc., and even strict checks on errors. Therefore, wooden fire doors have real fire performance. So everyone can rest assured of its performance.


Wooden fire door installation requirements


If you really want to set up a wooden fire door as a fire protection device, it is best to choose a swing door when installing. After all, the swing door is the most flexible and self-closing function, so that if a fire really occurs, the speed of escape will be A lot faster. It is forbidden to use non-flame retardant materials for inlay filling when the airtightness is not enough during installation to avoid threatening the fire door. Compared with steel materials, wooden materials are more prone to deformation and cracking, so after installing wooden fire doors, it is best to brush dry oil as a protection for the surface of the wooden door, so as to prevent damp deformation and fire. It can play a good fire performance.


Installation method of wooden fire door


step1: Before installation, coordinate the size of the door frame and the size of the opening. Basically, the size of the door frame should be less than 20mm of the door hole, so that the installation can ensure smooth installation and the gap after installation will not be too large;


step2: The lower foot of the door frame needs to be buried about 20mm below the ground, so that the door frame can appear to be stable and this size will not cause too much trouble to our passers-by;


Step3: When installing the door frame, it must be fixed before the wall, and the vertical angle must be maintained, so as to ensure the stability of the door frame installation;


step4: Then there is the erection. When erecting the erection, pay attention to the problem of straight angle. The straight angle needs to be strictly required to be the same angle, and it is best not to plan the saw;


Step5: Finally, fix each point. The fixed points on both sides of the door frame should not be less than three, and both should not be greater than 800mm, so that the wooden fire door can be stabilized.


Editor's summary: It seems that the fireproof performance of wooden fireproof doors is still quite good, so everyone can rest assured at this point, but the premise is to buy fireproof doors that meet national regulations. Well, the introduction about wooden fire doors is almost here, I hope this little knowledge introduction can help everyone.