Introduction To The Five Points Of Buying High-quality Fire Doors

May 10, 2021 Leave a message

Fire doors are particularly important as the first level of home fire protection, but when you buy inferior fire doors, the fire doors are no longer fireproof. What should you do? The fire department of our city investigated and destroyed a batch of honeycomb paper instead of fire prevention. Inferior fireproof doors with filling materials, here firefighters introduce a few tips for purchasing high-quality fireproof doors. According to regulations, steel and wooden fire doors can be divided into 90 minutes, 60 minutes and 30 minutes according to the fire resistance limit. The wood used to make wooden fire doors needs to be dried and flame-retardant. The hardware accessories used must also be fire-resistant hardware. Accessories.


   It is very important to buy high-quality fire doors:


   The first measure is to check the appearance. The high-quality steel\fireproof door is welded firmly and the solder joints are evenly distributed; the outer surface is sprayed smoothly and smoothly; there should be a product mark, a quality inspection mark and a quality certification (approved) mark at the specified position. The qualified wooden fire door should have a complete appearance, no damage, clean surface, no planing marks, burrs and hammer marks; cut corners and joints should be tight and flat.


The second trick is the number. The external dimensions of qualified products should be less than or equal to the external dimensions in the sample description, the thickness of the door leaf should be greater than or equal to the thickness of the door leaf in the sample description, and the width of the side wall of the door frame should be greater than or equal to the width of the door frame in the sample description. The outer dimension of the fireproof glass should be less than or equal to the outer dimension of the fireproof glass in the sample description, and the thickness of the fireproof glass should be greater than or equal to the thickness of the fireproof glass in the sample description.


   The third trick is to look at the seals. Qualified steel and wooden fire doors should be equipped with fire-proof sealing strips. The sealing strips should be straight, without arches, and have a qualified test report issued by a national-level testing agency.


   The fourth trick is to estimate the weight. The fire doors with qualified quality are generally heavier, and those with very light fire doors must be products of inferior quality.


The fifth trick is to check the certificate. The fire door is a product that is included in the type approval system. The product needs to be type tested before being sold. The general type inspection report describes the sample size, composition, materials, and product photos in detail. In the actual purchase, the type inspection report must be obtained from the manufacturer.