Foaming or other uneven factors of the solid wood door will affect the overall aesthetics and the sound insulation effect of the solid wood door. But in fact, we can check out these problems during the acceptance of the wooden door. Today, we will check the reasons for the uneven surface of the solid wood door.
1) The veneer blisters, indicating that the veneer is not evenly heated during the attaching process, or the glue is unevenly applied. The flat heat press can solve the problem of uneven heating during the flat door pasting.
2) The flatness of the surface of the wooden door is not enough, indicating that the selection of the board is relatively cheap, and the flatness of the board is not enough. It is conceivable that the environmental protection performance is also difficult to meet the standard.
3) Look at whether the process seams are uniform and small: Look at whether the process seams are even and small. This is almost the same as the car, which directly reflects the comprehensive process level of the enterprise;
4) Look at the quality of installation: Although the finished door set is produced in the factory, it is only considered as a finished product when it is actually delivered to the customer. Therefore, the door is only considered as a semi-finished product, and installation is the key link. A good installation process, a good installation tool, and an experienced installation technician are the keys to the success or failure of the installation;
5) Look at hardware: Hardware is a thing that makes it easy for wooden door manufacturers and customers to judge the quality of the door. It is recommended that customers try not to buy hardware parts by themselves. If the manufacturer really cannot provide satisfactory hardware products, you must choose your own choice. Major hardware products, such products are generally guaranteed for life.
